Admiral lnc6764a71 washer fix manual

Admiral washer aav 3 repair manual

To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Rotate the agitator until the grooves in the agitator match the grooves on the shaft, and push the agitator down. Place the new round rubber seal in the groove on top of the agitator.

Admiral LNC6764A71 04 - CABINET SERIES 16

Always turn off the gas at the source before repairing any gas appliance. Keep loose clothing and hair away from any moving parts. Pull the liquid fabric softener dispenser up (if used), to remove it from the top of the agitator. Insert a small screwdriver in the slot between the agitator and cap and pry the cap off the agitator. Reach in and remove the barrier cap and gasket by pulling up. Using a socket wrench (with extension) or nutdriver, remove the stud and seal which holds the agitator to the shaft. Remove the agitator mover by pulling this up off the agitator. Turn this agitator mover over so the camp and clutch dogs (4 pieces) slide out. Carefully remove the round rubber seal off the top of the agitator. Carefully remove the agitator by lifting straht up. Inspect the agitator shaft for worn grooves or rust.

Downloading file <i>Admiral</i> <i>Lnc6764a71</i> <i>Washer</i> - PDF Ebook.

Downloading file Admiral Lnc6764a71 Washer - PDF Ebook.

Note: The barrier cap must be pushed down past the holes in the mover, so the liquid from the dispenser can flow out of the holes. Push the barrier cap and gasket all the way down into the agitator mover. Press down on the liquid fabric softener dispenser or cap, which ever you have, until it is all the way down on the agitator.


Note: The cam has a cutout and tabs across from each other. These must line up in order for the came to slide down on the agitator. Place the agitator mover, cam, and dogs over the agitator while lining up the tabs.

Admiral lnc6764a71 washer fix manual:

Rating: 87 / 100

Overall: 91 Rates